TERMINATOR mobile
Introduction
Single-shaft shredder for pre-shredding
The Terminator is a slow-running, single-shaft shredder for all types of waste. Robust teeth on the shredding rotor and the opposing counter comb give coarse pre-crushing to a defined shredding size. The continuous cutting gap adjustment allows precise setting of the particle size for subsequent process steps.The hydraulic drive with load-dependent speed control ensures maximum utilization of the engine output. The hook lift platform, 3-axle chassis and steel tracks with hydraulic drive options provide excellent mobility.
Advantages at a glance
- Shredding of the most difficult materials
- Rugged design as pre-shredder provides high degree of shredding
- Variable particle size by adjusting cutting gap
- Hydraulic drive with overload protection provides high level of protection against contamination
Highlights
Everything possible
The Terminator is able to shred the most difficult materials. Everything is shred to the desired particles size. Applications with drum/opposing comb system variants range from coarse pre-crushing to defined shredding.
Powerful and reliable due to hydraulics
The hydraulic drive provides the highest shredding power and prevents jamming and blockages - clearing by reversing is possible at all times. Overload protection prevents unshreddable contraries from ruining the tool elements.
Coarse or fine
The continuous cutting gap adjustment allows tailoring of the produced particle size to subsequent usage. Completely swivelling of the counter comb provides perfect accessibility for maintenance of the shredding area.
Simple and logical control
The clearly laid out function keys make operation with the Terminator simple and reliable. Control electronics circuitry continually monitors the operational status of the machine and intervenes to protect the machine should a breakdown occur.
Specifications
| 3400 | 3400S | 5000 | 5000S | 6000S | |
|---|---|---|---|---|---|
| Motor | |||||
| Type | CAT ® C9 | CAT ® C9 | CAT ® C13 | CAT ® C13 | CAT ® C18 |
| Power | 242kW/330HP | 242kW/330HP Drum drive on both sides | 328kW/446HP | 328kW/446HP Drum drive on both sides | 429kW/583HP Drum drive on both sides |
| Shredding unit | |||||
| Drum length (mm) | 3000 | ||||
| Drum diameter (mm) | 1050 | ||||
| Drum rpm | max. 29 | max. 29 | max. 29 | max. 32 | max. 38 |
| Loading heights | |||||
| Filling height LxWxH (mm) | |||||
| Hook | 2465 | ||||
| Trailer | 2930 | ||||
| Track | 2905 | ||||
| Discharge height LxWxH (mm, 10-35°) | |||||
| Hook | 1365-3665 | ||||
| Trailer | 1890-4125 | ||||
| Track | 1805-4105 | ||||
| Dimensions | |||||
| Transport position LxWxH (mm) | |||||
| Hook | 6840x2470x2650 | ||||
| Trailer | 8120x2500x3255 | ||||
| Track | 6495x2855x3150 | ||||
| Working position LxWxH (mm, Conveyor belt 35°) | |||||
| Hook | 11870x3350x3820 | ||||
| Trailer | 12430x3350x4290 | ||||
| Track | 10900x3350x4260 | ||||
| Weight (dependent on equipment) | |||||
| Hook (t) | ~ 18.8 | ~ 19.8 | ~ 19.4 | ~ 20.4 | ~ 21.3 |
| Trailer (t) | ~ 21.0 | ~ 22.0 | ~ 21.6 | ~ 22.6 | ~ 23.5 |
| Track (t) | ~ 24.2 | ~ 25.2 | ~ 24.8 | ~ 25.8 | ~ 26.7 |
| Throughput | |||||
| Dependent on material (t/h) | to 45 | to 50 | to 60 | to 80 | to 100 |
