TERMINATOR stationary
Introduction
Single-shaft shredder for pre-shredding
The Terminator is a slow speed, high torque single-shaft shredder for hard-to-shred waste. C&D, railroad ties, carpet, MSW and tires are no problem for the rugged teeth mounted on the shredding rotor and opposing counter comb. The stepless cutting gap allows adjustment of the size of the output material. There is a choice of two drive systems – either a hydraulic system with optional disconnection from the shredding unit for constant power, or mechanical direct-drive for maximum efficiency.Advantages at a glance
- Shredding of the most difficult materials
- Rugged design as pre-shredder provides high degree of shredding
- Variable particle size by adjusting cutting gap
- Hydraulic drive with constant power control and optional separated design or direct-drive with optimum degree of efficiency
Highlights
Everything possible
The Terminator is able to shred the most difficult materials. Everything is shred to the desired particles size. Applications with drum/opposing comb system variants range from coarse pre-crushing to defined shredding.
Hydraulic drive: Standard or isolated design
Besides the standard stationary frame, isolation of the drive unit from the shredding unit is provided as an option for the hydraulic version. The advantages: Better protection of drive unit (less dust, better cooling) and space-saving integration into the process cycle.
Mechanical drive: Efficient with low maintenance
The cost-effective mechanical drive offers low energy costs due to high efficiency. The installation into the plant chain is simple: Set up - connect - power on. Further features are two speeds for adaption to material and automatic reverse control.
Coarse or fine
The continuous cutting gap adjustment allows tailoring of the produced particle size to subsequent usage. Completely swivelling of the counter comb provides perfect accessibility for maintenance of the shredding area.
Specifications
| 500 | 2200 | 3400 | 3400S | 5000 | 5000S | 6000S | |
|---|---|---|---|---|---|---|---|
| Drive | |||||||
| Hydraulic rating (kW) | - | 1x132 | 1x160 | 1x160 | 1x200 | 1x200 | 2x160 |
| Mechanical rating (kW) | 1x37 | 1x132 | 1x160 | 2x75 | - | 2x110 | 2x160 |
| Dimensions | |||||||
| L x W x H | plant specific | plant specific (only seperated unit possible) | |||||
| Weight, assembled unit (t) | ~11,8 | ~15,1 | ~15,5 | ~16,5 | ~15,8 | ~16,8 | plant specific (only seperated unit possible) |
| Cutter/drum | |||||||
| Length (mm) | 3000 | 3000 | 3000 | 3000 | 3000 | 3000 | 3000 |
| Diameter (mm) | 1050 | 1050 | 1050 | 1050 | 1050 | 1050 | 1050 |
| rpm hydraulic system (min-1) | - | max. 29 | max. 29 | max. 27 | max. 29 | max. 29 | max. 38 |
| rpm mechanical system (min-1) | 3 | 17/13 | 19/14 | 14/10 | - | 20/14 | 28/20 |
| Drum drives on both sides | Drum drives on both sides | Drum drives on both sides | |||||
| Throughput | |||||||
| Hydraulic, dependent on material (t/h) | - | to 30 | to 45 | to 50 | to 60 | to 80 | to 100 |
| Mechanic, depenent on material (t/h) | to 6 | to 20 | to 30 | to 35 | - | to 55 | to 75 |
