CHIPPO 510 C
Introduction
Tractor-driven universal drum chipper
The name Chippo is synonymous with a new generation of mobile chipping machines from Komptech. The Chippo 510 C is a tractor-driven drum chipper for wood trunks and pruning. The machine is designed for a drive rating of up to 500 HP, meaning the Chippo 510 C is currently one of the most powerful chippers in this class.
In the base configuration, the Chippo 510 C has a sturdy chassis with tandem axle. Numerous options for the tyres, the pulling mechanism and the loading crane simplify the tailoring to customer requirements. Frame and panelling are designed for a high degree of stability and doors and flaps simplify access for servicing.
Advantages at a glance
- Aggressive feed with pre-compression due to 2 horizontal and 2 vertical feed drums
- 2 chipping modes: high speed for pruning, lower speed for wood trunks
- Innovative mounting system of chipping blades
- Choice of discharge:
- "material-friendly" and energy-saving discharge via conveyor
- flexible and precise via blower with variable rotation speed
Highlights
The best feed system
The feed system with slat conveyor, transfer roller and two horizontal and two vertical feed rollers guarantees reliable grabbing and active forwarding to the chipping drum.
Perfect wood chippings: Large drum and long blade advance
- imagecaption
The chipping process is extremely efficient with the large open drum and the ideally positioned countercutter. The long advance of the sturdy chipping blade produces uniform shape and size with a minimum of fine fractions.
Efficient chipping with two speeds
The shredding speed is adapted to the material on the Chippo only: Higher drum speed and hence higher cut frequency for smallwood and pruning, or reduced rotation speed but higher cutting power for trunk wood.
Discharge selection: Blower or conveyor
Either a blower, configurable precisely to requirements with variable speed, or a pivotable rear conveyor belt (more gentle on the material and energy-saving) is used for discharge.
Specifications
| CHIPPO 510 C | |
|---|---|
| Drive | |
| Type | via PTO tractor |
| Power | up to 370 kW / 500 HP |
| Material feeding | |
| Feed table LxW (mm) | 2180 x 1680 |
| Feed table hight (mm) | 1600 |
| Feeder opening HxW (mm) | 750 x 1000 (with vertical feed drums 1610) |
| Chipping unit | |
| Drum diameter (mm) | 1050 |
| Drum width (mm) | 1023 |
| Number of blades | 12 |
| Drum rotation speed (U/min) | 400 and 560 |
| Material discharge | |
| Blower: max. blower height (mm) | 5370 |
| Blower: max. discharge range (m) | 20 |
| Conveyor belt: max. discharge height (m) | ~ 4.7 |
| Dimensions | |
| Transport dimensions LxWxH (mm) | 7170 x 2550 x 3722 |
| Weight (t) dependent on equipment | ~ 18 |
| Throughput | |
| Dependent on material (m³/h) | up to 180 |
