CHIPPO 8010 C
Introduction
Mobile drum chipper
The new Chippo 8010 C is the highest-performance member of the Chippo family. Powered by a 780 HP CAT auxiliary engine, the 8010 C produces up to 320 stacked cubic meters of chips per hour. Whether for bulky limbs or massive trunks, the active feed system and large, open chipping drum with heavy-duty blades get right down to business.
In the truck version, the loading crane cabin provides an ideal view, and the Hydrodrive® lets the machine negotiate steep slopes. If the going gets tougher, the track drive gets going. For processing on site, the trailer version is the right version.
Advantages at a glance
- Aggressive feed with pre-compression due to 2 horizontal and 2 vertical feed drums
- 2 chipping modes: high speed for pruning, lower speed for wood trunks
- Innovative mounting system of chipping blades
- Choice of discharge:
- "material-friendly" and energy-saving discharge via conveyor
- flexible and precise via blower with variable rotation speed
- Best mobility: 4-axle truck, chain drive or 3-axle trailer
Highlights
The best feed system
The feed system with slat conveyor, transfer roller and two horizontal and two vertical feed rollers guarantees reliable grabbing and active forwarding to the chipping drum.
Perfect wood chippings: Large drum and long blade advance
The chipping process is extremely efficient with the large open drum and the ideally positioned countercutter. The long advance of the sturdy chipping blade produces uniform shape and size with a minimum of fine fractions.
Efficient chipping with two speeds
The shredding speed is adapted to the material on the Chippo only: Higher drum speed and hence higher cut frequency for smallwood and pruning, or reduced rotation speed but higher cutting power for trunk wood.
Discharge selection: Blower or conveyor
Either a blower, configurable precisely to requirements with variable speed, or a pivotable rear conveyor belt (more gentle on the material and energy-saving) is used for discharge.
Specifications
| CHIPPO 8010 C | |
|---|---|
| Drive | |
| Type | CAT ® C18 |
| Power | 571 kW / 780 HP |
| Material feeding | |
| Feed table LxW (mm) | 2180 x 1680 |
| Feed table hight (mm) | 1870 |
| Feeder opening HxW (mm) | 750 x 1000 (with vertical feed drums 1610) |
| Chipping unit | |
| Drum diameter (mm) | 1050 |
| Drum width (mm) | 1023 |
| Number of blades | 12 |
| Drum rotation speed (U/min) | 400 |
| Material discharge | |
| Blower: max. blower height (mm) | 5600 |
| Blower: max. discharge range (m) | 20 |
| Conveyor belt: max. discharge height (m) | ~ 5 |
| Dimensions | |
| Transport dimensions LxWxH (mm) |
9130 x 2550 x 4000 |
| Weight (t) dependent on equipment | ~ 33.5 |
| Throughput | |
| Dependent on material (m³/h) | up to 320 |
