MULTISTAR L3 / L2
Introduction
MULTISTAR L3 / MULTISTAR L2
Ease of operation and high-quality components mean the Multistar L3/L2 star screen mobile unit is perfect for continuous operation at large plants. Separation into three fractions (L2: two fractions) takes place in one operation – with windsifting and Fe-separation on request.The CLEANSTAR system guarantees a high level of sorting regardless of material moisture. Unique flexibility with screen fractions produced – change of particle sizes is possible at the press of a button.
Advantages at a glance
- separation into three fractions (L2: two fractions), windsifting, Fe-separation - in one compact machine
- 9,156 yd³ hopper, wide discharge belts for convenient working
- high throughput with precise selectivity, even with moist materials
- simple speed control at the screen deck to change particle size in seconds
Highlights
Everything possible
A series of options makes the machine a genuine allrounder: Wind sifter for coarse and medium fraction, magnetic rolls and rolling fraction separator. A switch enables the production of only two fractions. Hopper overload sidewalls, central lubrication, pneumatic spring axles increase the working comfort.
Extremely efficient
Highest operating efficiency results from high throughput combined with low operating costs. Hopper, metering system as well as design and size of screen decks create a compact unit with virtually unbeatable throughput. Optimized wear protection of all parts in contact with material and an efficient diesel-electric drive system guarantee lowest operating costs.
Always unclogged thanks to CLEANSTAR
The screen units are continually cleaned by the most simplest and efficient patented CLEANSTAR cleaning system. Each star has a wear-resistant cleaning finger that clears the screen gap to the surrounding stars on each rotation. So screening is always in season with Multistar star screens.
From fine to coarse by the press of a button
Particle size can be controlled by varying the rotation speed of the star shafts. The particle size in the bandwidth specified by the star geometry can be changed within seconds by the control panel with touchscreen and visualisation. A screen section from 0.3" - 6" is covered due to different types and arrangement of the stars.
Everything possible
A series of options makes the machine a genuine allrounder: Wind sifter for coarse and medium fraction, magnetic rolls and rolling fraction separator. A switch enables the production of only two fractions. Hopper overload sidewalls, central lubrication, pneumatic spring axles increase the working comfort.
Specifications
| Multistar L3 | Multistar L2 | ||
|---|---|---|---|
| Drive | |||
| Diesel generator (kVA) | 60 | 44 | |
| Material feeding | |||
| Hopper volume (yrd³) | ~ 9.2 | ~ 9.2 | |
| Filling length | 11'10" | 11'10" | |
| Filling height | 11'6" | 11'6" | |
| Screen segments | |||
| Coarse screen LxW / area (ft²) | 10'6"x4'1" / 40.9 | - | |
| Fine screen LxW / area (ft²) | 19'0"x4'1" / 77.5 | 19'0"x4'1" / 77.5 | |
| Screen section | |||
| Coarse particle | > 2 3/8".....3" | > 2 3/8".....3" | |
| Medium particle | 3/8".....1" / 2 3/8".....3" | - | |
| Fein particle | 0 / 3/8".....1" | 0 / 2 3/8".....3" | |
| Material discarge | |||
| Max. discharge height coarse fraction | 9'10" | 9'10" | |
| Max. discharge height medium fraction | 11'10" | - | |
| Max. discharge height fine fraction | 10'6" | 10'6" | |
| Dimensions | |||
| Transport dimensions LxWxH | 36'11"x8'4"x13'1" | 35'3"x8'4"x13'1" | |
| Working dimensions LxWxH | 42'6"x20'8"x13'1" | 46'1"x20'8"x13'1" | |
| Weight (t.sh) | 21.0 | 17.6 | |
| Throughput | |||
| Throughput performance (yrd³/h) (dependent on material) | up to 180 | up to 150 |
