A new electro-mechanical drive concept is available for the TERMINATOR, designed specifically for use in waste splitting and treatment plants.
Function
Technically, the requirement was for a simple, rugged system meeting the high
demands of a waste shredder: Power is transferred to a reverse gear/manual transmission unit, and then on to the drum drive, by a standard asynchronous motor using a Powerband belt system. With this combination the drive is just as reliable as a hydraulic system.
Lower operating costs
The electro-mechanical direct drive mechanism leads to a reduction in specific operating costs (cost per ton of shredded material). Since there are no hydraulic components, no costs are incurred by servicing or consumables such as hydraulic oils.
Plug and work
System integration of a TERMINATOR with direct drive follows the principal of plug and play: Set up, connect, power on – work can now begin.
Short installation times are possible if conveyor belt connection and electrical connection are provided. The machine is hence an interesting retrofit solution, especially as the compact size helps during installation. The right machine exists for any system size because all installation sizes are available as electro-mechanical and electro-hydraulic versions.
The best is saved for last: In terms of investment, a machine with direct drive is the most cost-effective route to a real TERMINATOR.
|
