Ask for a free quote.
Single-shaft shredder for pre-shredding
The Terminator is a slow speed, high torque single-shaft shredder for hard-to-shred waste. C&D, railroad ties, carpet, MSW and tires are no problem for the rugged teeth mounted on the shredding drum and opposing counter comb. The stepless cutting gap allows adjustment of the size of the output material.
Power is delivered by an electric motor with minimal maintenance and transfered to the shredding drum by a mechanical drive with optimum efficiency.
Advantages at a glance
Built to last
Shreds even the most difficult materials
Komptech plus
Rugged design as pre-shredder provides high degree of shredding
Flexible
Variable particle size by adjusting cutting gap
Innovation
Mechanical drum drive for highest efficiency
-
Highlights
Everything possible
The Terminator is able to shred the most difficult materials. Everything is shred to the desired particles size. Applications with drum/opposing comb system variants range from coarse pre-crushing to defined shredding.
- prev
- 1/
- next
-
Highlights
Coarse or fine
The continuous cutting gap adjustment allows tailoring of the produced particle size to subsequent usage. Completely swivelling of the counter comb provides perfect accessibility for maintenance of the shredding area.
- prev
- 1/
- next
-
Highlights
Efficient drive
The cost-effective mechanical drive offers low energy costs due to high efficiency. The installation into the plant chain is simple: Set up - connect - power on. Further features are two speeds for adaption to material and automatic reverse control.
- prev
- 1/
- next
Specification
| 1700 | 2200 | 3400 | 3400S | 5000S | 6000S | |
|---|---|---|---|---|---|---|
| DRIVE | ||||||
| Mechanical rating (kW) | 1x75 | 1x132 | 1x160 | 2x75 | 2x110 | 2x160 |
| DIMENSIONS | ||||||
| Weight (~t) | 13.6 | 13.6 | 14.0 | 15.0 | 15.3 | 15.8 |
| SHREDDING UNIT | ||||||
| Drum length (mm) | 3000 | 3000 | 3000 | 3000 | 3000 | 3000 |
| Drum diameter (mm) | 1050 | 1050 | 1050 | 1050 | 1050 | 1050 |
| rpm mechanical system (min-1) | 14/10 | 17/13 | 19/14 | 14/10 | 20/14 | 28/20 |
| MAX. THROUGHPUT | ||||||
| Mechanic, depenent on material (t/h) | 15 | 20 | 30 | 35 | 55 | 75 |
