Ask for a free quote.
Stationary ballistic separator
The Ballistor is used to separate out usable fractions from waste and potential recyclables. By combining ballistic separation with screening, separation is performed in one operation in accordance with the criteria 3/2-dimensional, rolling-cubic-rigid/flat-soft-narrow, or undersized/oversized particles.
With a choice of separation into three or four fractions, five sizes and many options, the Ballistor separator can be configured to suit the application.


Advantages at a glance

Rugged design with long service life and low operating costs

Wide range of applications – from municipal waste to potential recyclables and building material waste

Efficient drive design with low power requirement

High degree of selectivity with easy setting of separation limit
Specification
4300 | 6300 | 8300 | 10300 | |
---|---|---|---|---|
Drive | ||||
Power (kW) | 5.0 | 11.0 | 11.0 | 11.0 |
Dimensions | ||||
Length (mm) | 7475 | 7475 | 7475 | 7475 |
Width (mm) | 2400 | 3250 | 4100 | 4960 |
Height without inlet cap (mm) | 1930 | 1930 | 1930 | 1930 |
Transport Width (mm) | 2150 | 3000 | 3940 | 4800 |
Screen | ||||
Number of screening elements | 4 | 6 | 8 | 10 |
Length screening elements (mm) | 5600 | 5600 | 5600 | 5600 |
Screening area (m²) | 9.6 | 14.4 | 19.2 | 23.9 |
Weight | ||||
Weight, machine only (~t) | 5.75 | 7.0 | 8.5 | 9.75 |
Throughput up to | ||||
Dependent on material (m³/h) | 60 | 100 | 130 | 160 |