Separation

Metalfex

Non ferrous and ferrous metal separator

Electric
Mobile
Mechanical drive

The Metalfex adds a mobile non-ferrous metal separator to the Komptech line. Designed for conveyor feed, the Metalfex has its own intake conveyor and an overhead ferrous separator upstream of non-ferrous separation. It removes non-ferrous metals using an eddy current separator with eccentric pole system, discharging the metals and the cleaned fraction by two folding conveyors to the left and right of the machine.

All components are electrically powered, from the on-board diesel generator or from grid current. The Metalfex is available as a compact hook lift version and as an easily maneuverable two-axle trailer.

  • 11,5-
    15,0

    Weight (t)

  • 160

    Throughput (m³/h)

  • 20

    Engine power (kVa)

Advantages of the Metalfex

Wide
application range

The Metalfex can be used with shredded waste wood and bulk waste, industrial and commercial waste, household waste, mixed construction waste and shredder output. With its tough, powerful design, it can take input grain sizes up to 300 mm in an extremely wide range of materials. 

Advantages of the Metalfex

Ferrous separation
included

A neodymium overbelt magnet over the intake conveyor to the non-ferrous separator conveyor gives effective removal of all ferrous parts, which can be chuted to the left or right as desired 

Advantages of the Metalfex

Precisely
adjustable

Non-ferrous separation is by an eddy current separator with eccentric pole system. The adjustable separating vertex allows it to be set precisely for the material at hand. The NF separator unit working width is 1.95 m. 

 

Advantages of the Metalfex

Comfortable
discharge

The non-ferrous metals and cleaned fraction are output on two folding conveyors to the right and left of the machine. The 0.8 m wide belts can reach discharge heights of 2.3 to 3.15 metres, depending on the machine configuration. 

Advantages of the Metalfex

Maintenance
made easy

Large access doors on both sides grant easy access to all maintenance points. Even a belt change of the NF separator is easy. 

Suitable for

  • Metalfex
Engine

    Power (kW/hp)

  • 34/46

    Engine

  • Diesel-
    generator
Weight*

    Weight (tonnes)

  • 15

    Hook (t)

  • 11,5
Throughput

    Throughput capacity (m³/h)

  • up to 160
Material issue

    Fork length (mm)

  • 1600

    Feed height Hook (mm)

  • 1975

    Feed height Trailer (mm)

  • 2975
Material issue

    Discharge height non-ferrous metals Hook (mm)

  • 2300
    (2800 with supports)

    Discharge height pure fraction Hook (mm)

  • 2300
    (2800 with supports)

    Max. Discharge height non-ferrous metals trailer (mm)

  • 3155

    Max. Discharge height pure fraction trailer (mm)

  • 3155
Iron deposition

    Typ

  • Over belt magnet (Neodym)

    Working width (mm)

  • 600
Non-ferrous separation

    Typ

  • Eddy current separator

    Working width (mm)

  • 1950

*depending on equipment

The Komptech plus

This might also interest you

Separation

Hurrikan S

Wind sifter with electric drive

  • Diesel generator: 55 kW
  • Max. throughput: 60 m³/h
  • Mobility: Trailer
Electric
Mobile
Mechanical drive

Separation

Stonefex

Stone separator

  • Diesel generator: 50 kA
  • Max. throughput: 100 m³/h
  • Mobility: Trailer
Electric
Mobile
Mechanical drive

Separation

Ballistor

Ballistic separator

  • Electric motor: 5.5-11 kW 
  • Max. throughput: 60-160 m³/h
  • Screening area: 9.6-23.9 m² 
Electric
Stationary
Mechanical drive

Shredding

Terminator mobile

Low-speed single-shaft shredder for all types of waste

  • Diesel engine: 250-447 kW
  • Hydraulic drum drive
  • Mobility: Trailer, Track, Hook
Diesel
Mobile
Hydraulic drive
  • Request

      *Required fields.
    • Find a dealer
    • Products